A guyed mast is a tall thin vertical structure that depends on guy lines for stability. The mast itself has the compressive strength to support its own weight, but usually does not have the shear strength to stand unsupported, and requires guy lines, diagonal tensioned cables attached to the ground, usually spaced at equal angles about its base, to resist lateral forces such as wind loads and keep it upright

Guyed masts are usually used for meteorological measurements at certain heights above ground level.

Guyed tower type G45

Manufacturer : PartoSystem

1.     Tower type: Guyed tower with triangular section and 45cm side length

2.     Height:

§  81m with 27pcs sections

§  60m with 20pcs sections

§  40m with 13pcs sections

In addition a crown

(each section is 3m)

3.     Material: Pipe 32mm (diagonal 2.8 mm), with wire 10mm Z formed and Galvanized  (zinc coating ) between 80 to 110µm 

Downloads

Guyed tower type G65-80

Manufacturer : PartoSystem

1.     Tower type: Guyed tower with triangular section and 65cm side length

2.     Height:

§  81m with 27pcs sections, In addition a crown

(each section is 3m)

3.     Material: Pipe 41mm (diagonal 3.1 mm), with wire 10mm Z formed and Galvanized  (zinc coating ) between 80 to 110µm 

Downloads

Guyed tower type G65-100

Manufacturer : PartoSystem

1.      Tower type: Guyed tower with triangular section and 65cm side length

2.      Height:

§  100m with 33pcs sections, In addition a crown

(each section is 3m)

3.      Material: Pipe 41mm (diagonal 3.1 mm), with wire 10mm Z formed and Galvanized  (zinc coating ) between 80 to 110µm 

Downloads